7.5 m² per bachelor dwelling unit
15.0 m² per 1-bedroom dwelling unit
25 m² per dwelling unit with more than 1-bedroom ^.6

FOOTNOTES (Section 15.4.5):
^.1 The density in the CD18 zone will be controlled in the form of a 219 Covenant registered on the remainder parcel(s), which will indicate a remainder buildable area equal to the total site density (271,500 m²) minus the already approved buildable area. The registered 219 Covenant will be amended, to reflect the remaining buildable area, as a condition of issuance of every development permit and as a condition of every subdivision approval. The approved buildable area will be determined by the:
(a) buildable area approved through all form & character development permits within the CD18 Areas, and
(b) for those lots not requiring a form & character Development Permit it will be through the subdivision approval process based on a calculation of 350 m² per unit. For example: if there are 10 lots being approved and eight of those lots are for single detached housing and two of the lots are for semi-detached housing the calculation used to determine the buildable area would be 12x350 m² = 4,200 m².
^.2 The height measurements begin from the deck elevation. Supportive deck structures cannot exceed 7.0 m in height.
^.3 Any building or structure in area I that exceed 6 storeys then any exposed storey where parking is provided within the building must include 60% of the exposed area as habitable space.
^.4 Any building or structure in Areas II and IV that exceed 4 storeys then any exposed storey where parking is provided within the building must include 60% of the exposed area as habitable space.
^.5 Except the setback shall be 1.5 m to the CD Zone boundary when that boundary is fronting the Okanagan Lake Riparian Management Area or any park areas.
^.6 A minimum of 4.0 m² per dwelling unit of the Common and Private Amenity Space shall be configured as common area that is accessible to all residents and must not be located within the required setback areas.